Product Name: Mould racking
- Easy maintenance of mould
- Optimization of mould area
- Easy lifting and lowering mould .
- Each two moulds has safety latch
- Load on each tier: 1,000 – 6,000 kg
- Increase storage area to 50%.
- Contact : 0918223724 - 0918752515
- Email : email@example.com
Mould racking is assembled by clamps. Moulds are installed on the racking tiers in the form of drawers with a hauling winch on top.
When it is required to feed the mould, lifting arm is adjusted to the position of mould containing drawer and mould is hooked to lifting arm or fed into the rack in an easy manner.
Tan Phuong Phat mould racking is designed with high safety, easy use, low investment cost yet high effectiveness.